Defender E203010 3kVA 110V 16A Portable Transformer

The Defender E203010 3kVA 110V 16A Portable Transformer provides a reliable 110V power supply for demanding construction work and temporary site applications.

It steps down and isolates a 230V mains supply, delivering 110V AC power for compatible industrial tools, lighting and other site equipment.

Two covered 16A outlet sockets allow a pair of compatible appliances to be connected to the transformer at the same time.

The 3kVA intermittent output supports higher-demand applications for shorter working periods, while the 1.65kVA continuous rating provides a steady supply for equipment operating over longer periods.

When working at its maximum intermittent output, the transformer has a duty cycle of five minutes on followed by fifteen minutes off.

It can be used with compatible industrial equipment such as SDS drills, small demolition hammers, bench grinders, 4.5-inch angle grinders, jigsaws and circular saws.

The transformer can also support suitable lighting products, industrial fans, dehumidifiers and fume extractors within its rated output.

Resettable thermal overload protection helps protect the transformer and connected equipment if its operating limits are exceeded.

The centre-tapped-to-earth output provides an additional level of electrical safety commonly required for professional 110V site power systems.

Class I insulation provides protective earthing through the transformer’s construction and electrical connection.

A tough, impact-resistant GRP enclosure protects the internal components from knocks, regular transportation and demanding working environments.

The non-corrosive enclosure incorporates a large carrying handle, making the 16.5kg transformer easier to move between work areas and store after use.

An IP44 rating provides protection against solid objects larger than 1mm and splashing water, supporting use in dusty and changeable site conditions.

The transformer operates from a 230V AC, 50Hz and 13A input, supplying a 110V AC output rated at 16A.

It is supplied with a 2m input cable and fitted 240V 13A plug, providing a complete connection to a compatible mains supply.

Compliance with BS EN 61558-1 confirms that the transformer meets the relevant standard for this type of electrical equipment.